Latest News

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech AMS3 - Box III as Virtual Device

Postby techmobil » 19 Apr 2014, o 10:24

Martech AMS3 - Box III as Virtual Device

Virtual Device - the ability to emulate various interfaces with the specified parameters.
In Tool bookmark you can find:

- TX (K-line),RX(L-line), (range of 0..9V..+12V)
- RX (K-line),TX(L-line), (range of 0..9V..+12V)
- K-line, (range of 0..9V..+12V)
- L-line, (range of 0..9V..+12V)
- UART1, (range of 0..+5V)
- UART1 - inverted, (range of 0..+5V)
- M-Bus (range of 0..+5V)
- RS232 (range of -9V..+9V)

After defining and memorizing (the Save button saves the settings in the device), you can close AMS3.
From that moment every time you open com port with previously selected parameters.
The transmission on the selected protocols running stable even at high speeds - 3Mb/s.
To sum up - from now on we can use the Box III as a universal interface to other programs.

As a reminder, Box III supports:
- M35080 ( 3/6/V6/VP )
- M35080 ( D80-DOWQ )
- M35080 ( D160-DOWQ )
All types can be read, write and erase - most importantly in a very short time.

Added models:
- Honda, 2YA1 MF721R0 BOSE, 39101-S1A-G110-M1, 24C02 by Alpine
- Ford, 6000 CD RDS EON, 98AP-18C815-AC by Visteon
- KIA, B02002, OK588 66 8C0, 24c02
- VW, RCD-300, 1K0 035 186AF, 24C32 by Grundig
- Opel, Touch & Conect MC Corsa EU, 7 612 830 112, 13 362 758 by Bosch (tylko Box III)

Best regards,
Martech Team.
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

LCN total blocked - supported by Martech Box III

Postby techmobil » 29 Apr 2014, o 15:40

LCN total blocked - supported by Martech Box III

From now it's possible to repair / reset total blocked untis with folllowing screen information:

Incorrect PIN entered too many times.
System is now locked.
Contact your Nissan dealer.

It works on all Nissan LCN, Opel Touch & Connect and similar units.
It's available only for Box III and OMAP-5948 activation.

Watch example of repair process:
http://www.youtube.com/watch?v=6BXZynGVswA

[PL]
Od tego momentu można odblokować całkowicie zablokowane radia z serii LCN / Touch & Connect.
Aktualizacja przewidziana jest dla urządzeń Martech Box III oraz aktywacji OMAP-5948.

Przykład naprawy radia:
http://www.youtube.com/watch?v=6BXZynGVswA


Best regards,

Martech Team.
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech update Box III V0.1.1.1570 -Clip V0.0.9.64

Postby techmobil » 21 May 2014, o 08:27

Martech update Box III V0.1.1.1570 -Clip V0.0.9.64

Latest Update :

- 22DC710/65B by Philips - general calculator
- Opel, CD 40 Opera, 24C32 by Grundig
- Honda, DEH-M6227ZH, 39101-S5S-B510-M1, 93C46 (Reverse) by Pioneer
- Ford, HSRNS (NX), 7 612 330 732, BM2T-18K931-BA by Blaupunkt
- KDC-DNX5260BT, Y39-6122-71, 24C64 by Kenwood
- Honda, MF721R0, 39101-S5S-B510-M1, 24C02 by Alpine
- VW, RCD 300, 7 643 222 360, 1K0 035 186J, 95640 by Blaupunkt
- Traffic Pro, BE-4720 by Becker


How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech update Box III V0.1.1.1574 -Clip V0.0.9.65

Postby techmobil » 23 May 2014, o 14:26

Martech update Box III V0.1.1.1574 -Clip V0.0.9.65

Latest Update :

- Ford, 4050 RDS EON, YM21-18K876-FD, ST92F120V107 by Visteon - M series
- Ford, 4050NE, YM21-18K876-FC, ST92F120V107 by Visteon - M series
- Ford, 5000NE RDS, YM21-18K876-JB, ST92F120V107 by Visteon - M series
- Ford, 6000NE RDS, 7M5 035 195B, YM21-18K876-KC, ST92F120V107 by Visteon - M series
- Audi, RNS-E Basic EU, 4B0 035 192P, MBM29XL12DF by AISIN AW

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Re: Latest News

Postby techmobil » 9 Jun 2014, o 17:16

Martech AMS update 0.1.1.1634 Box III

Latest Update :

- VW, Gamma 3, 357 035 186G, 24c02 by Philips
- VW, Gamma 3, 357 035 186, 24c04 by Philips
- VW, Gamma 3, 357 035 186D, 24c04 by Philips
- Nissan, LCN 2 A.0, 7 612 033 023 by Bosch
- VW, RNS 315 EU, 3C0 035 279B by Technisat
- VW, RNS 315 EU, 3C0 035 279G by Technisat
- VW, RNS 315 EU, 3C0 035 279L by Technisat
- VW, RNS 315 EU, 3C0 035 279N by Technisat
- VW, RNS 315 EU, 3C0 035 279P by Technisat
- VW, RNS 315 EU, 3C0 035 279Q by Technisat
- VW, RNS 315 EU, 3C8 035 279 by Technisat
- VW, RNS 315 EU, 3C8 035 279A by Technisat
- VW, RNS 315 EU, 3C8 035 279B by Technisat
- VW, RNS 315 EU, 3C8 035 279C by Technisat
- VW, RNS 315 EU, 3C8 035 279D by Technisat
- Skoda, RNS 315 EU, 3T0 035 192 by Technisat
- Skoda, RNS 315 EU, 3T0 035 192G by Technisat
- Skoda, RNS 315 EU, 3T0 035 192J by Technisat
- Skoda, RNS 315 EU, 3T0 035 192K by Technisat
- Skoda, RNS 315 EU, 3T0 035 192L by Technisat
- Skoda, RNS 315 EU, 3T0 035 192M by Technisat
- Skoda, RNS 315 EU, 3T0 035 193B by Technisat
- Skoda, RNS 315 EU, 3T0 035 193C by Technisat
- Skoda, RNS 315 EU, 5JA 035 192 by Technisat
- Seat, RNS 315 EU, 5P0 035 191J by Technisat
- Seat, RNS 315 EU, 5P0 035 191K by Technisat
- Seat, RNS 315 EU, 5P0 035 191N by Technisat
- Seat, RNS 315 EU, 5P0 035 191P by Technisat
- Seat, RNS 315 EU, 6JA 035 192 by Technisat
- Seat, RNS 315 EU, 6JA 035 192A by Technisat
- Seat, RNS 315 EU, 6JA 035 192B by Technisat
- Seat, RNS 315 EU, 6JA 035 192C by Technisat
- Opel, Touch & Conect MC Corsa EU, 7 612 830 172, 13 431 892 by Bosch


More models, options in this activation will come very soon.
Best Regards,

Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech AMS3 0.1.1.1777 - CAN scanner / COM terminal

Postby techmobil » 16 Jul 2014, o 08:16

Martech AMS3 0.1.1.1777 - CAN scanner / COM terminal

Latest update:
- CAN scaner added under Tools bookmark
( you can scan can protocol on various devices)
CAN speed might be calculated automatically, other functions like Prescaler, SJW, BS1, BS2 might be choosen by user.

- COM terminal added with many options
( you can send commands also to device connected)

- new drivers added
- small bugs fixed
- box firmware update ( faster USB connection )

CAN scaner (scaner, not CAN data player) and terminal is free for all users.
Waiting for feedbacks from users.

Martech Team
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Re: Latest News

Postby techmobil » 28 Jul 2014, o 18:53

Martech AMS update 0.1.1.1801 Box III - Clip V0.0.9.68

Latest Update :
- Nissan, AGC-0071RF, 28185 BH30A, 24C64 by Daewoo
- Renault, Auditorium Tronic, MH9RN92S, 8 200 089 153
- Porsche, CDR210, BE-2282, 24C04 by Becker
- Porsche, CDR22, BE-4467, 24C02 by Becker
- VW, RCD 310 EU, 1Z0 035 161G, 24LC32 by Delphi
- Renault, RENRDW 142-00, 24C64 by VDO
- Suzuki, SUKNR 301-09, 39101-65JB, 24C32 by VDO

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Emulators - new activation from Martech Team

Postby techmobil » 6 Aug 2014, o 18:19

Martech AMS update 0.1.1.1865

Emulators - new activation from Martech Team operates only on the Box III.
The main feature is the ability to run for bench testing: dashboards, LCD displays, instrument clusters, navigations.

First version allows to connect "on the table":
- Renault dashboard (various versions)
- Renault Scenic dashboard
- Renault Laguna III dashboard
- Peugeot - Citroen LCD display

New versions and devices will be gradually added.

In order to add new devices we had developped and added to Box III:
- CAN, K-Line and UART scanner
- i2c terminal
- frequency meter
- other tools in the future

In case of problems with scanning, there is possibility to help remotely or sending unit to us to adding.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech AMS3 - Opel TID LCD display emulator added

Postby techmobil » 17 Aug 2014, o 11:01

Martech AMS3 - Opel TID LCD display emulator added

Latest update allows Emulators activation users to emulate TID display from Opel cars.

You can:
- test on bench various radios like CAR-300, CDR-500, CDR-2005
- emulate 8/10 ditigits displays

Connection is very easy, you can see it there:
http://help.martech.pl/?q=node/102

Best Regards
Martech Team
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech BOX III v0.1.1.1919 - Clip V0.0.9.70 update

Postby techmobil » 22 Aug 2014, o 11:59

Martech BOX III v0.1.1.1919 - Clip V0.0.9.70 update

Latest Update :

- Beta 4, 9.18124, 893 035 152 by Grundig
- Opel, CAR-300(D), 7 645 852 520, 68HC05B16 by Blaupunkt
- Renault, Carminat Navigation, BE-7409 by Becker
- Honda, CQ-EH1465Z, 39175-SDN-L120-M2, 93c86 by Panasonic
- Volvo, FM12 Truck, 28322131, 24C32 by Delphi
- Opel, LCD TID ( 8/10 char ) emulator
- MGR Rover, MG Stereo CD5404 MP3X, XQE000940PMA, 24C32 by VDO
- Nissan, PN-2419F, 93C46 by Clarion
- Nissan, PP-2514L, 28188 CF000, 93C46 by Clarion
- Renault, RENMCC 102-00, 8200 338 527, 24C32 by VDO
- VW, ROME NAV 55E, 7 612 300 306 by Blaupunkt
- SC-303D (C), 9.18209 by Grundig
- SC-303D (C), 9.18287 by Grundig
- SC-303D (C), 9.18288 by Grundig
- Opel, SC803B by Grundig
- Opel, SC804 by Grundig
- Opel, SC804B, 9.18146 by Grundig
- VW, SV HUI 224/5GD, 1JD 035 119B, 24C04 by VDO
- WKC-2201 RDS, 9.18350-81 by Grundig
- WKC-3804 REVERSE, 9.18195 by Grundig
- WKC-3842 by Grundig
- WKC-3851 RDS, 9.18151 by Grundig
- WKC-3870 RDS INFOMAT, 9.18205 by Grundig
- WKC-3880 RDS INFOMAT, 9.18204 by Grundig
- WKC-4870 RDS A by Grundig
- WKC-4870 RDS by Grundig
- WKC-4870, 9.18145 by Grundig
- WKC-4871 RDS INFOMAT, 9.18228 by Grundig
- Porsche, WKC-5000 RDS by Grundig
- Porsche, WKC-5000, 9.18159 by Grundig
- WKC-5201 RDS INFOMAT, 9.18331-8151 by Grundig
- WKC-5290 RDS INFOMAT by Grundig
- WKC-5400 by Grundig
- Porsche, WKC-5500 RDS, 9.18160 by Grundig
- Porsche, WKC-5500 RDS by Grundig
- WKC-6400 RDS INFOMAT by Grundig
- WKC-6500 RDS INFOMAT, 9.18291 by Grundig


How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech BOX III v0.1.1.2001

Postby techmobil » 8 Sep 2014, o 21:13

Martech BOX III v0.1.2.2075 - Clip 0.0.9.72
Renesas Boot ID/Pass Finder activation works only on Box III and it allows to read/write boot password secured chips.
Suported procesors:

M30245FCGP
M30262F4GP
M30624FGAFP
M30624FGAGP
M30624FGFP
M30624FGGP
M30624FGLFP
M30624FGLGP
M30624FGMFP
M30624FGMGP
M30624FGNFP
M30624FGNGP
M30624FGPFP
M30624FGPGP

Description http://help.martech.pl/?q=node/108

It works on boot versions 2.01 and 4.01 (2.00 is not supported yet).

Supported models:
-Webasto AIR TOP 2000 ST

Latest Update :

- Seat, Aura CD, 9.18431-8151, 1M0 035 186D, 24LC16 by Grundig
- VW, Gamma, 7 648 231 380, 1J0 035 188E, 95160 by Blaupunkt
- Ford, HSRNS (NX), CD340, 7 612 300 527, 8S7T-18K931-AE by Blaupunkt
- New Jersey MP68, 7 648 498 310, 95128 by Blaupunkt
- Chrysler, P05091180AB A, 24c64
- VW, RCD 510 Prem-8, 28372938, 1K0 035 180AF, S29GL64 by Delphi
- VW, RCD-200, 600035152E, 24C16 by Famar
- Renault, RENRDW 100-10, FD0504500238600, 24C32 by VDO
- Renault, SAT, 22DC665/62, 24C02 by Philips
- Skoda, Stream CD MP3, 1Z0 035 161A, MC9S12 by Visteon

A sample video can be seen here:
https://www.youtube.com/watch?feature=p ... wYB_KEykXM

Connection is very simple:
http://help.martech.pl/?q=node/108

Best Regards
Martech Team
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech Box III vX.X.X.X - RNS 315 without SPI protection T

Postby techmobil » 2 Oct 2014, o 19:34

Martech Box III v - RNS 315 without SPI protection

Today we are releasing new version of tool with RNS 315 support without SPI protection needs.
Decode process:
- it's the same like previous, just without point 1
( http://help.martech.pl/?q=node/75 )
- we use Mode 3 after model select
- we need to connect one more wire from Box III to radio board
( http://help.martech.pl/sites/pliki/files/rns315.png )

Mode 3 works on latest firmware version 0500 and on older also.

If you want to unsubscribe from this subscription - reply to this email with your forum nickname.

Best Regards

Martech Team
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Re: Latest News

Postby techmobil » 9 Oct 2014, o 09:37

Martech BOX III v0.1.2.2081 - Clip V0.0.9.73 update

Latest Update :


- Suzuki, DY-3E44S-SL, 39101-59J80, 93LC56 by Mitsubishi
- EC4290 CD by Grundig - general calculator
- Seat, SE 251, 7 640 288 366, 6JA 035 186, 95128 by Bosch
- Ford, Single CD - KW2000, 8V4T-18C815-AE, TMS470R1VF288 by FoMoCo - V series
- VW, ULVWMP3, 7E0 035 516A, 24C16 by Technisat



How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Martech BOX III v0.1.2.2159 ST10 Flasher - new activation

Postby techmobil » 28 Oct 2014, o 13:08

Martech BOX III v0.1.2.2159

ST10 Flasher - new activation for Box III

Box III received another feature - the ability to fully program the ST10 series processors.
First version allows to read, erase and write:
- ST10F269 ( internal flash )
- ST10F276 ( internal flash )
- ST10F276 ( AM29F400BT - ext. flash )


Programming is carried out in circuit - without desoldering processors.
This also applies ext. flash connected to the CPU ( eg. AM400 in RNS510 navigation).
Operation time for read, write, and erase it is a dozen of seconds.

Examples of the use of activation:
- repair not working touch panel in RNS 510
- repair software faults in the RNS 510 ( gateway error while flashing )
- repair hang on radio logo Mercedes NTG 2.5 navigation
- repair car clusters / computers


Connections to the system are very simple:
- http://help.martech.pl/?q=node/111
- http://help.martech.pl/?q=node/32

In the coming updates you can expect support for programming BMW CCC and Opel CD70.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl

[PL]
ST10 Flasher - nowa aktywacja dla Box III

Box III uzyskał kolejną funkcjonalność - możliwość pełnego programowania procesorów serii ST10.
Pierwsza wersja umożliwia odczt, kasowanie oraz zapis układów:
- ST10F269 ( internal flash )
- ST10F276 ( internal flash )
- ST10F276 ( AM29F400BT - ext. flash )


Programowanie odbywa się w układzie - bez konieczności wylutowywania procesorów.
Dotyczy to również zewn. flasha podłączonego do procesora ( np. AM400 w radiu RNS510 ).
Czas odczytu, zapisu i kasowania to kilkanaście sekund.

Przykładowe zastosowanie aktywacji:
- naprawa niedziałającego panela dotykowego w RNS 510
- naprawa usterek programowych w RNS 510 ( błąd gateway podczas flashowania )
- zawieszające się na logo radia Mercedes NTG 2.5
- naprawa sterowników samochodowych


Podłączenia do układów są bardzo proste:
- http://help.martech.pl/?q=node/111
- http://help.martech.pl/?q=node/32

W nadchodzących aktualizacjach przewidujemy wsparcie dla programowania układów w radiach BMW CCC oraz Opel CD70.


Pozdrowienia
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111

User avatar
techmobil
Martech Team Member
Posts: 1611
Joined: 27 Jan 2009, o 19:01
Contact:

Re: Latest News

Postby techmobil » 13 Nov 2014, o 18:31

Martech BOX III v0.1.2.2225

Ford CAN code reader
- new activation for Box III.

Activation allows you to:
- read the original radio code
- read, reset, and change the VIN stored in the radio


The reading process takes a while and is done by CAN (radio must support this protocol).
Procedure can be performed on bench or in the car:
http://help.martech.pl/?q=node/112

Supported models:
- radios based on NEC D70F3357, TMS470, MC9s12, ST92 (KW2000, GGDS) with V or M prefix
- navigation modules produced by Visteon and Bosch (C307 / C214 Nav module, FX - LSRNS, NX - HSRNS)


NOTE: activation reads the original factory code.
If it happens that the code does not match, it means that it has been changed and you should read the processor / memory depending on the device.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
http://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl

[PL]
Ford CAN code reader - nowa aktywacja dla Box III

Aktywacja umożliwia:
- odczyt oryginalnego kodu radia
- odczyt, zresetowanie oraz zmianę nr VIN zapisanego w radiu


Proces odczytu zajmuje chwilę i odbywa się poprzez CAN (radio musi obsługiwać ten protokół).
Procedure można wykonać na stole lub w aucie:
http://help.martech.pl/?q=node/112


Obsługiwane modele:
- radia oparte na procesorze NEC D70F3357, TMS470, MC9s12, ST92 (KW2000, GGDS) z prefixem V lub M
- moduły nawigacji produkowane przez Visteon oraz Bosch( C307/C214 Nav module, FX - LSRNS, NX - HSRNS )


UWAGA: aktywacja odczytuje oryginalny fabryczny kod urządzenia.
Jeżeli zdarzy się, że kod nie pasuje oznacza to, że został zmieniony i należy odczytać procesor / pamięć w zależności od urządzenia.

Pozdrowienia
Martech Team
http://www.martech.pl
MARTECH TEAM
shop@martech.pl
TechMobil@martech.pl
GG 3364708
698 999 111


Return to “Latest News”



Who is online

Users browsing this forum: No registered users and 135 guests